• Backing Crusher Parts
• Grouting Machinery
• Locking Bearings
• Setting Anchor Bolts
• Chocking of Machinery

Product Description

Part “A” is a white low viscosity liquid and is packed in a re-sealable plastic bucket.
Part “B” is a blue coloured liquid and is packed in a screw capped plastic bottle.

Method of Use

1. Seal all crevices with putty (such as Megapoxy PF Rapid set putty) so that backing mixture does not leak out.
2. Make certain no settling has occurred in the resin by stirring, then add the hardener (Part “B”) slowly with continual mixing.
3. Using low speed electric drill, mix well, but do not aerate.
4. Mix until uniform colour is obtained.
5. The mixture must be used immediately after mixing.
6. If ambient temperature is high, the kits should be stored in as cool a place as possible. High ambients will lead to greatly shortened usable life.
7. If topping up is required, then this can be carried out at a later date when it is convenient.
8. If adhesion is not required, one or both surfaces should be coated with wax or grease based release agent.
9. Allow Megapoxy HICB to harden before returning crusher into service.

Delivery Time

To give you the most economical prices, Trimax Online Indonesia prices are based on combined bulk shipping whenever possible. Shipping is usually initiated within 1 week. Depending on the shipping address, please allow additional transit days for delivery. If you require expedited shipping, please indicate the urgency to telysa@trimaxmachinery.com after you have completed your order and received your order confirmation email. Depending on stock availability, we may be able to agree to your request. You will be notified of additional shipping charges associated with expedited orders and have the option to continue or cancel the order.